There were diesel trucks before the ’80s-’90s Ram Cummins, but they weren’t as good as this one. Under the hood was a venerable 5.9-liter straight-six diesel engine with only 160 HP but a healthy 400 lb-ft of torque. However, for the 1991 model year, Dodge updated the truck, giving it more power and options.
As a matter of fact, most diesel truck fans consider this to be the best year in the series. The power and torque figures seem low considering today’s engines, but this is an old truck with old technology. However, old technology doesn’t mean that the ’91 Ram Cummins is not a capable vehicle. With a 4×4 drivetrain, it is an extremely good truck.
After the successful Advanced Design generation, Chevrolet presented the Task Force in 1955. Afterward, they continued to improve the product with more options and better designs. Capturing the essence of America’s ’50s styling, the Chevy Task Force was better with the introduction of two V8 engines, the 265 and 283 CID. It also offered automatic transmission as an option.
The venerable 235 CID six-cylinder was standard. Also, buyers could get three truck bed lengths and various trim levels. They included a basic working truck or the luxurious Apache with four headlights, a heavily-chromed grill, and a two-tone exterior. The Task Force generation showed that Chevrolet viewed the truck segment as equal in importance to the passenger car line up. This is because they invested heavily in designs, equipment, engines, and options.
Back in the early ’60s, the Dodge lineup of trucks was behind Ford and Chevrolet. That was because their competitors offered newer models, more options, and wider engine choices. But Dodge didn’t give up. Instead, they introduced an interesting special edition, available from 1964 to 1966, that took the pickup world by storm.
They called it their High-Performance Package and it featured a lot of go-faster goodies from Mopar. First, there was the mighty 426 Wedge V8 engine with 375 HP. At the moment, it was the biggest, most powerful engine they ever installed in a pickup truck. Also, it came with bucket seats in the interior, a 6,000 rpm tachometer, racing stripes, and a high-performance transmission.
The basic idea behind this model was to offer the biggest available engine in the lightest full-size truck. It was basically the muscle car philosophy in a truck form. That is why the Chevrolet engineers took an ordinary 1990 Chevy 1500 pickup truck with the short bed option and added a massive 454 V8 engine. The enormous 7.2-liter V8 was good for 230 to 255 HP, which was a diminutive number.
But it also had 385 lb-ft of torque, which made it fly down the road. Chevy borrowed the big-block engine from their heavy-duty truck lineup. The 454 SS was a durable but thirsty machine. But on the outside, the 454 SS was low key without any wild graphics or color choices.
The Dakota was a compact pickup truck from Dodge they sold between 1987 and 1996. It was dependable, tough-looking, and came with a wide arrange of engines and trim levels. But Dodge wanted more, so in the late â80s, the company decided to build a performance version. They wanted to have the legendary Carroll Shelby create it, who was working with Chrysler Corporation at the moment.
Shelby took a regular production Dakota and installed a 5.2-liter V8 engine with 175 HP. Although the power output was relatively small, the Dakota was light and had lots of torque. And all that meant this compact truck had a convincing performance. Shelby also dressed up the Dakota with a special paint job and trim. Then, they added a roll bar and wheels, which made this little truck stand out on the streets.
Despite the fact that all of America’s car industry was involved in the war effort from 1942 to 1945, Chevrolet’s designers planned ahead. So in 1947, Chevy introduced the 3100 series truck. It one of the first truly modern vehicles presented in post-war America. The 3100 was a revolutionary model in many ways.
It featured modern styling with integrated fenders and a tilted windshield. It also had a bigger truck bed and wider track for better stability. Besides that, the 3100 offered three engine choices and three payload sizes of the truck. The buyers could choose three engines, again all three six-cylinder units: 216,235 and 261 cid and three payload levels: half-ton, three-quarter-ton, and one-ton. There were short and long-wheelbase versions and a panel van option. All of that gave it the nickname “Advanced Design,” which showed how innovative those trucks were. The Advanced Design Chevy managed to outsell Ford trucks several years in a row, too.
In the late 50’s Chevrolet presented the Corvair, a revolutionary compact car with a rear-mounted air-cooled flat-six engine. Despite the promising sales and initial reception, in the mid-60’s they discovered the Corvair was unstable. This killed its sales and gave Chevrolet bad press. However, before that happened, Chevrolet introduced the Greenbrier, a van they based on the Corvair. Using the same floorplan, engine, and drivetrain, the Greenbrier was a cool-looking and decent performing compact van.
The engine was underneath the cabin or truck bed if you chose the pickup version. It could carry up to nine people or half a ton of weight. Since the floor was flat, Chevrolet introduced a practical Rampside version with a side ramp for easier unloading of the cargo. However, they only offered the Greenbrier for four years, from 1961 to 1965. Despite its qualities, the market simply favored more conventional models from Dodge and Ford.
Chevy introduced the third generation of their popular C/K trucks in 1973. It was one of the biggest, most important trucks in their history. Not only it was advanced and well-engineered, but it also featured many firsts for Chevrolet and for the entire truck segment, as well. Chevy called it the “Square Body” for its boxy design. This third-generation C/K featured a computer-designed body with more space and comfort than ever before.
The truck was bigger and tougher due to the new platform, revised suspension, and tougher axles. Customers had numerous cab configurations, special editions, engine options, and details to choose from, too. This made the third-generation C/K one of the best trucks in the world at the time. Chevy produced the C/K from 1973 to 1991 in the U.S. They also produced this model was in Argentina, Chile, Mexico, and South Korea. During the long production run, Chevrolet introduced a diesel engine as an option. This proved to be a highly popular choice in Europe and South America.